Important Safety Instructions; Preparation And Usage Of This Device; Cleaning And Disinfecting - 3A HEALTH CARE ATOMIZER HOMECARE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

PROFESSIONAL PISTON COMPRESSOR NEBULISER
1
Piston compressor
2
Power cord
3
ON/OFF Switch
Dear Customer, This nebuliser is a high-quality device for inhalation the-rapy for asthma, chronic bronchitis, and other re-
spiratory illnesses. This medical device generates aerosols with variable characteristics to adapt to the patient's respiratory
pathology and generating a medicinal mist of particles that are small enough to reach even the deepest regions of your lungs
and be of maximal benefit.The operation and usage of the device is very straightforward. All common liquid medication can
be used for inhalation therapy.Please read through these instructions carefully so that you understand all functions and safety
information. We want you to be happy with your Atomizer product. For any further questions you may have, please ask your
chemist or usual retailer.

IMPORTANT SAFETY INSTRUCTIONS

This device may only be used for the purposes described in this booklet. The manufacturer cannot be held liable for dama-
ge caused by incorrect application. This device is not suitable for anaesthesia and lung ventilation.This device should only
be used with original accessories as shown in these instructions. Do not use the device if you think it is damaged or notice
anything unusual. Never open the device. This device comprises sensitive components and must be treated with caution.
Observe the storage and operating conditions described in the «Technical Specifications» section. Protect it from: - water and
moisture - extreme temperatures - impact and dropping - contamination and dust - direct sunlight - heat and cold. Only use
the medication prescribed for you by your doctor and follow your doctor's instructions with regard to dosage, duration and
frequency of the therapy.
All accessories should only be used by one person. Never bend the nebuliser over 60°.
Ensure that children do not use the device unsupervised some parts are small enough to be swallowed.
Use of this device is not intended as a substitute for consultation with your physician.

PREPARATION AND USAGE OF THIS DEVICE

Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and Disinfecting».
1 Assemble the nebuliser kit 12 Ensure that all parts are complete.
2 Fill the nebuliser with the inhalation solution as per your doctor's instructions. Ensure that you do not exceed the maximum
level. 3 Connect the nebuliser with the air hose 6 to the compressorm 1 and plug the power cord 2 into the socket. 4. Switch
the ON/OFF switch 3 to position «I» to turn on the device and place the mouthpiece 7 in the mouth or fit one of the face
masks over mouth and nose. The mouthpiece gives you a better drug delivery to the lungs. Choose between adult 8 or child
face mask 9 and make sure that it encloses the mouth and nose area completely. 5. Breathe in and out calmly during the
therapy. Sit in a relaxed position with the upper body upright. Do not lie down while inhaling. Stop inhalation if you feel
unwell. 6 After completing the inhalation period recommen-ded by your doctor, switch the ON/OFF switch 3 to position «O»
to turn off the device and unplug it from the socket. 7 Empty the remaining medication from the nebuliser and clean the device
as described in the section «Cleaning and Disinfecting».

CLEANING AND DISINFECTING

Thoroughly clean all components to remove medication residuals and possible impurities after each treatment.The compressor
1 and the air hose 6 should be clea-ned with a clean, moist cloth.
Always wash your hands well before cleaning and disinfecting the accessories.
Do not expose the compressor to water or heat.
Replace the air hose for each treatment with a new patient or in case of impurities.
Unplug the device before cleaning.
Cleaning with water
Wash all nebuliser components (except air hose) under warm tap water (max 60 °C) for about 5 minutes adding
EN
4
Air filter compartment
5
Technojet Nebulizer
6
Air hose
7
Mouthpiece
8
Adult face mask
9
Child face mask
6
10
Nosepiece
11
Replacing air filter
12
Assembling nebuliser kit

Publicité

Table des Matières
loading

Table des Matières