Returning The Device - afriso GS 1.1 Notice Technique

9 Troubleshooting
Any malfunctions that cannot be removed by means of the measures
described in this chapter may only be repaired by the manufacturer.
Problem
Yellow LED is on
Alarm cannot be
acknowledged
Other malfunctions
10 Decommissioning, disposal
Dispose of the product in compliance with all applicable directives, standards
and safety regulations.
Electronic components must not be disposed of together with the normal
household waste.
11

Returning the device

Get in touch with us before returning your product (service@afriso.de).
12 Warranty
See our terms and conditions at www.afriso.com or your purchase contract
for information on warranty.
Troubleshooting
Possible reason
Line interruption or short
circuit
Incorrect calibration
-
1. Disconnect the product from mains.
2. Dismount the product (see chapter "Mounting", reverse
sequence of steps).
3. Dispose of the product.
Repair
Check the electrical
connection between the
gas alarm unit GS 2.1
and the gas sensor
GS 4.1
Return the product to
the manufacturer for
recalibration
Contact the AFRISO
service hotline
GS 1.1./GS 2.1/GS 4.1
EN
21