Parental Controls - Anker Nebula Astro Mode D'emploi

EN
3. Projector
On the home menu, select the Settings icon to access the Settings page. Select
[Projector], and press
[Image Mode]
[Eye Comfort Mode]
[Eye Guard Tech]
[Auto Keystone Correction] Enable / disable auto keystone correction.
[Projector Mode]

4. Parental Controls

On the home menu, select
and press .
[Settings Password]
[Change Password]
[Time Limit]
13
.
[Auto] / [Standard Mode] / [Battery Mode]
[On] / [Off]
Enable or disable eye comfort mode.
[Off]: The Eye Guard function is disabled. It is set to Off by
default.
[< 20cm] / [< 40cm] / [< 60cm]: When the projector is
set to < 20cm / < 40cm / < 60cm, Eye Guard Tech will be
activated and your projector will be disabled within a certain
distance.
[Front Projection]: The projector is located in front of the
projection surface.
[Rear Projection]: The projector is located behind the
projection surface.
[Inverted Front Projection]: The projector is hanging
from the ceiling in an upside down position. The image is
rotated by 180 degrees.
[Inverted Rear Projection]: The projector is hanging
from the ceiling in an upside down position behind the
projection surface. The image is rotated by 180 degrees
and horizontally mirrored.
to access the Settings page. Select [Parental Controls],
[[On] / [Off]
When Settings Password is set to On, Change Password
is enabled. This option enables you to change and
reset your password. If you forget your password, try
the master code. The master code is case-sensitive
and includes serial number + Nebula by default.
(eg.: XXXXXXXXXXXNebula)
Set the time limit or time duration when your child is
allowed to access the projector daily.