SET THE TIME
You can set the time for two time zones. The time is set by the GPS, but you
choose the time zone (GMT offset), daylight saving (ON or OFF), time format
(12- or 24-hour), and date format (month-day or day-month).
NOTE: The GMT offset is the number of hours difference between your time
zone and Greenwich Mean Time. Each GMT offset is listed with the abbreviated
name of a major city in that time zone (for example, London is displayed as
LON). If you do not know your GMT offset, find your city or a nearby one in the
time zone chart in the User Manual available at www.timex.com/manuals
1. Press MODE until SET displays.
2. Press - or + to select TIME, then press OK.
3. Press + or - to select the time zone to set (TIME 1 or TIME 2), then press OK.
4. Press + or - to select AUTO (to allow the GPS to set the time), then press OK.
5. Press + or - to select your time zone, then press OK.
6. Repeat step 5 for dST (daylight saving), time format, and date format.
7. Press MODE to exit.
8
NOTE: You can also set the time manually, preventing the GPS from setting the
time. See Setting the Time Manually in the User Manual for more information.
SET DISPlAy UNITS
Choose the system of measurement in which your user and workout data
will display.
You can display units in English (miles, feet, inches, pounds) or metric
(kilometers, meters, centimeters, kilograms) measurements.
1. Press MODE until SET displays.
2. Press - or + to select UNIT, then press OK.
3. Press + or - to select MI for English or KM for metric, then press OK.
4. Press MODE to exit.
cONFIgURE yOUR USER PROFIlE
Enter your gender, age, weight, to improve calorie calculations.
1. Press MODE until SET displays.
9