Starting Your Chlorinator; Set Up; Setting Timers - Certikin CTX Consignes D'installation Et D'utilisation

3.0 Starting your Chlorinator

Your Chlorinator Controller operation can be divided into 4 areas;
a. MAINTENANCE – selects specialised functions of your chlorinator and initial set up of Chlorinator to suit your pool
and spa.
b. SET – selects changes in Chlorine Product and pH of your pool and spa water
c. CLOCK & TIMER buttons – sets current time and filtration, chlorine production and pH monitoring and
adjustment times
d. Pool and Spa Mode – Allows selection of pool mode where controller will produce chlorine suitable for pool and
Spa Mode, where chlorine production and acid dosing is reduced to suit a smaller volume of water in the Spa.

3.1 Set Up

a. Press "Pool Mode" button until Manually Off appears and then Press "Clock" Button
b. Select "Day" and use buttons adjacent to LCD screen to set the current time. The clock is a 24 hour clock.
Timer
Clock
HOUR
Select hour and use up or down buttons
to change hour.

3.2 Setting Timers

Your CERTIKIN CTX Series chlorinator has 4 timers per day enabling you to set different periods in which your filtration
pump, pH control and chlorine production will operate. Timers are set by entering a start time, and a RUN time for how
long you want to operate. To set timers, do the following:
a. Press the TIMER button.
b. Press HOUR button to set the hour for the timer selected and use the Up/Down arrows to change the time.
c. Press MIN button to select the minutes for the timer selected and use the Up/Down arrows to change the time.
Press the NEXT button to select the RUN time or another time and set as required. Note: The RUN time
represents the number of hours you want the unit to operate for.
d. When finished, press the NEXT button a number of times to scroll through the other times until you return to
normal display. This saves your new settings.
e. Select Auto Sanitising by pressing the POOL mode button. The POOL mode button has three settings,
manually ON which turns on system indefinitely, manually OFF which turns system off indefinitely, and AUTO
model which sets the controller on timer clock mode. In AUTO mode the LCD screen will display the date and
pool sanitiser message.
INST322 – CERTIKIN CTX SALT CHLORINATOR Instructions V02_14
TIME: 11:07
MIN
Select Min and use up or down buttons to
change the minute
Up & down buttons
5