Publicité
Les langues disponibles
Les langues disponibles
9. Using the 4 holes on each bracket as a template, pre-drill the
cabinet using a
/
" (1.6 mm) bit. Secure the mounting brackets
1
16
to cabinet with the 8 bracket screws provided. See Figure 8.
100 Paragon Drive, Montvale, NJ 07645, USA • 1-800-BE-SHARP (237-4277)
335 Britannia Road East, Mississauga, Ontario, L4Z 1W9, Canada • 905-568-7140
Figure 8
10. Place side trims on top of the mounting brackets, aligning the
screw holes.
Note: Each side trim is marked "L" and "R" on the back
side to indicate Left and Right.
11. Mount the Left and Right 30" trim extensions, using the 4 trim
screws provided. See Figure 9.
E 6
Figure 9
Publicité
