Power Supply Specifications (Absorption); Mechanical Specifications - dB Technologies VIO L212 Mode D'emploi

English

POWER SUPPLY SPECIFICATIONS (ABSORPTION)

Absorption at 1/8th of power in
average use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
Max number of modules per
power supply line (**)
[mains input + mains link]:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.

MECHANICAL SPECIFICATIONS

Material:
Grille:
Handles
Front mounting
pre-sets:
Rear mounting
pre-sets:
Flown and stacked assembly:
Width:
Height:
Depth:
Weight:
Product features, specifications and appearance are subject to
changes without prior notice. dBTechnologies reserves the right
to make changes or improvements in design or manufacture
without any obligation to incorporate such changes or
improvements in previously
VIO-L212
1 + 2 (220-240V~) / 1 + 1 (100-120V~)
wooden cabinet - black polyurea finish
Retractable brackets, built-in cabinet points with quick-release pins
Graduated bracket and movable joint with quick-release pins
manufactured products.
2 A (230V~) - 3.1 A (115V~)
4.9 A (230V~) - 7.5 A (115V~)
53 W
3.2 A
full metal - CNC machining
integrated (2x side)
With DRK-212 fly-bar accessory
1100 mm (43.31 inches)
380 mm (14.96 inches)
450 mm (17.72 inches)
54.4 kg (119.9 lbs)
info@dbtechnologies-aeb.com
A.E.B. Industriale Srl
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA
BOLOGNA (ITALY)
Tel +39 051 969870
Fax +39 051 969725
www.dbtechnologies.com
Code 420120270 REV. 1.0
55