Features; Front View; Rear View - Tripp-Lite B021-000-19-SH Manuel D'utilisateur

4. Features

Front View

1
Handle: Pull to slide the module out; push to slide the module in.
2 LCD Monitor: After sliding the module out, flip up the cover to
access the LCD monitor, keyboard and touch pad.
3
Keyboard
4 Rackmounting Brackets: The brackets secure the chassis to a
standard 19-inch rack or rack enclosure.
5 2-Button Touchpad: Press the left button to left-click, press
the right button to right-click. Scroll up and down the screen by
running finger up or down the far right side of the touchpad.
6
Console and LCD Controls: The controls located here include the
console power On/Off button, and the buttons used to control the
position and picture setting of the LCD display.
7
Pass-Through USB Port: This port is inactive until a USB A Male/
Male cable (Tripp Lite model UR020-Series) is used to connect the
Pass-Through port on the back of the console to a USB port on a
computer or KVM switch. When active, a USB device connected
to the front of the console will then be available for use with the
connected computer or KVM switch.
3
7
5
1
2
6

Rear View

8
Console Port Section: Connects the console to your server or
KVM switch with the included KVM cable kit.
9
Power Socket: The included power adapter plugs in here.
10
Pass-Through USB Port: This port is connected to the Pass-
Through USB port on the front of the console. The front Pass-
Through port is active when a USB A Male/Male cable (Tripp Lite
model UR020-Series) is connected between the Pass-Through port
on the back and a USB port on a KVM or server.
4
4
3 3
10 9
8