Coby CSMP120 Manuel D'instruction page 22

if you experience problems with the speaker system (e.g., no sound), please check the
following:
Ensure that the power cord is connected securely to the unit and the wall outlet.

Ensure that the unit has been turned on.

Ensure that the volume is set to an audible level.

Ensure that the correct audio source has been selected.

When playing iPod, ensure that the iPod is compatible with this unit, and that the proper dock adapter

(supplied by Apple) is installed.
When listening to the radio, ensure that the correct radio frequency is selected.

When using an auxiliary audio device, make sure that it has been connected securely to the AUX In jack

with a 3.5mm male-to-male audio cable.
The CSMP120 does not turn on.
Ensure that the unit has been powered on (set the Power / Function switch to the "ON" position).

Ensure that the AC adapter is connected securely to an AC ~120V/60Hz power outlet.

Page 22 Troubleshooting & Support