OK. OWM 16222 A3 Mode D'emploi page 18

EN
Open the detergent drawer.
Fig. 8 1.
Note the different compartments:
A: Detergent for main wash,
B: Fabric softener for rinsing
C: Detergent for pre-wash
2. Fill in laundry detergent and fabric softener according to manufacturer's instructions.
Note on foam detection: If too much detergent is used, excessive foam is formed. The
foam formation is checked and excessive foam is removed.
3. Close the detergent drawer by pushing it in completely.
Start washing
Turn on the washing machine with the Ein/Aus switch.
1.
2. Use the program selector to select a suitable program and, if necessary, a suitable additional
function. Please refer to the following Program table.
Use the Temperatur (temperature) button to change the temperature if the preset temperature
3.
does not meet your requirements. The higher the temperature the more energy is consumed.
If necessary, select one of the additional functions, Intense or Extra Rinse, by pressing the
4.
Function button.
Start the washing process by pressing the Start/Pause button.
5.
Caution! The door may only be opened if the appliance is not running, e.g. after a washing program is
finished. Do not try to open the door while the appliance is running.
Display
In the display you can see the following functions:
• Running time
• Failure codes and service information
IM_OWM16222A3_170811_V06_HR.indb 18
option 1 for washing powder,
option 2 for liquid detergent
18
11/8/17 4:17 pm