Troubleshooting Guide - Empire S-5000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Specifications
Total ouput power: 82 watts RMS
Frequency response: 50Hz - 22kHz
Crossover cut-out frequency: 3 kHz
Blue led indicator on the front panel
Size: 260mm (H) x 180mm (W) x 200mm (D)
Weight: 10 kg / couple

troubleshooting guide

Sound from only one speaker
Please ensure all speaker cable connections are correct. The speakers should be connected with stereo cable.
Please try an alternate sound source such as a CD player, MP3 or other player. If both speakers now work cor-
rectly, the original sound source is at fault. Please ensure the computer Soundcard is installed correctly.
When listening to a cd played by the computer, I hear the sound from only one speaker
This often happens with new computers – when listening to a CD played by the computer, you hear the sound
from only one speaker, but both speakers work if you listen to a WAV file or when you play a videogame.
This happens because the CD-ROM drive is not connected correctly to the soundcard, or one of the cable is
under short circuit.
Please refer to the CD-ROM drive user manual to fix this jumper issue.
no sound from any of the speakers
1. Please ensure AC adapter is plugged in and power outlet is switched on.
2. Please ensure all audio cable connections are correct.
3. Please ensure sound source equipment is working correctly.
English
9

Publicité

Table des Matières
loading

Produits Connexes pour Empire S-5000

Table des Matières