Empire S-5000 Mode D'emploi page 7

uSB connector:
An USB connector is located on the back of the main speaker to
power USB MP3 players or other peripherals using a voltage of 5V
on 0.5A in direct current.
This allows to recharge the MP3 player (or other peripheral) during
use.
Setting bass, treble and volume:
The controls for bass and treble have infinite range, so they can be turned
as much as desired. The zero position is shown by the blue LED lighting
up on the setting scale.
Turning clockwise will raise the level while turning counterclockwise with
reduce it; the same applies for the volume.
To use the S-5000 as studio monitors we suggest a completely flat setting,
with both bass and treble LEDs lit.
Balanced input (XLr type)
This kind of connector can be found most frequently on professional products, recording boards
and other similar systems. The 3 pins XLR connectors are used for balanced signals, and they
provide the best reliability and performance with soundcards and other devices equipped with a
balanced output.
English 7