Unit Conversion; Weighing Operation - Ataller KS-4088 Manuel D'utilisation

2.

Unit Conversion

2-1.When power on，the default unit is g.
2-2.If the user need to switch the unit，press button ON to start up the scale ,
then press UNIT button to change, g=>lb:oz，lb:oz=>oz，oz=>ml, ml=>g
3.

Weighing Operation

3-1. Firstly put the scale on flat and hard surface, press ON/TARE button to
start up the scale，return to zero after full display.
3-2.Put the object on the scale，the LCD indicates the weight of the object；
press TARE button.
3-3. Add another item to the scale, and you will get a reading of its weight
regardless of previously measured item. Press the ON/TARE button to
reset the scale to zero
3
GB