Haiku FR127A-S0 Instructions page 11

Install Lower Safety Cable and Ground Wire
4
Install the safety cable and ground wire lugs with the unpainted screws and lock washers (Fig. 4.1).
Make sure all hardware is secure, and then gently tug the cables at the top of the extension tube to reduce slack (Fig. 4.2).
Slide the wiring cover down the extension tube, resting it on the fan hub. Make sure no wires are visible between the cover and fan hub.
Slide the canopy down the extension tube (Fig. 4.3).
Fig. 4.1
Safety Cable
Lock Lock
Washer Screw
Washer
HAIKU® BY BIG ASS FANS
Fig. 4.2
Ground Wire
(Green)
Fig. 4.3
Canopy
Wiring
Cover
9