edenox DV-211-S Manuel D'instructions page 13

3. OPERATION
3.1 General information.
3.2 Control panel description.
3.3 Machine settings and programs.
3.1 GENERAL INFORMATION
The regulation is carried out by means of an analogical thermostat, therefore it is only necessary to turn the
control in the panel to programme the working temperature.
3.2 CONTROL PANEL DESCRIPTION
The appliance is turned on by pressing the start-up switch located on the front part of the controls. The switch
will light up when pressed. The appliance should then start up the heating process immediately, without any
type of delay.
In the case of model PVP-211/-W, the screen lamp goes on using the switch located on the screen itself.
3.3 MACHINE SETTINGS AND PROGRAMS
HEATING SYSTEM:
The heating is generated by means of hidden heating elements installed in the lower part of the vitro-ceramic
glass.
In the case of model PVP-211/-W, the screen includes an ECO halogen lamp (energy saving) which provides
light and heat to the food displayed in the top part as a supplement to the heating of the panel.
WORKING TEMPERATURES: Between 30ºC and 120ºC.
5 edenox.com
ENGLISH