edenox DV-211-S Manuel D'instructions page 12

2.4 MANUFACTURER'S IDENTIFICATION LABEL DESCRIPTION.
2.5 INSTALLATION AND ASSEMBLY
Avoid having direct sources of heat, cold, humidity, sunlight and ultraviolet rays in the fi nal location of this
appliance. Heaters, radiators, air conditioning, etc. can have a negative infl uence on the correct operation
of the same.
2.6 CONNECTIONS (ELECTRIC, GAS, WATER)
Once the panel has been fi tted into the hole in the furniture destined for this purpose, the anchoring is carried
out by means of the anchoring supplied as shown in the illustration below.
The control box located on the lower part of the appliance can easily be moved to the side of the technical
cabinet if required (for example in the case of having the front access of the appliance closed due
construction reasons of the furniture housing it
At the same time, it can be removed from its technical cabinet and installed in any other panel (for example,
at the buffet front in order to operate and regulate the appliance without having to open the door).
In order to move the control box you need to remove the probe from the inside of the vitro-ceramic panel
and insert it again in its original housing once the control panel front is located in its defi nite position.
Therefore, it is essential that this operation is carried out by qualifi ed technical personnel.
4 edenox.com
Data in the identifi cation label:
Serial number (code+year+serialnumber)
Code: 38321XX
Model: DV-
CE symbol
Waste disposal symbol
Manufacturing site
Working range temperature: 30ºC/120ºC
Voltage: 220-230V
Power consumption
ENGLISH