Description Of The Appliance - Melchioni Family SAHARA Notice D'instructions

Before connecting the appliance, check that the voltage shown on the data plate
matches that of your electricity and that the electric plug is grounded. In the event of
incompatibility between the electric outlet and the plug of the appliance, have the
outlet replaced with another more suitable type by professionally qualified
personnel, who will make sure that the section of the wires of the outlet is
appropriate for the absorbed power of the appliance. In general, the use of adapters
or extension cords is not recommended; if their use is indispensable, they must
conform to existing safety standards and their current capacity (amperes) must not
be less that the maximum of the appliance.
Position the appliance far from other sources of heat, inflammable materials
(curtains, carpets, etc.), inflammable gases or explosive materials (spray cans) and
from materials that can deform on exposure to heat. Make sure that there is 120 cm
of free space in front of the appliance and 50 cm on the sides.
Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined
plane (the appliance could upset). Make sure the safety system get in touch with the
floor, otherwise the appliance doesn't work.
Make sure that the cable is correctly positioned, that it is not touching hot elements
or sharp edges, is not wound around the utensil, is not twisted up on itself or in the
way to prevent the utensil from being pulled over. Check that you cannot trip over to
prevent accidental falls or harm to persons.
All repairs should be made by a competent qualified electrician. In any case you
should return the appliance to this service.

DESCRIPTION OF THE APPLIANCE

19/56