Audiovox CNP2000UCA Guide D'installation page 7

7
Step 2
Connect the cable into the PIA. Plug the other end of the cable into the head
unit adapter. Read your cable installation manual for proper installation to
your specific head unit.
Step 3
Start your car and turn on your unit to confirm that the XM Direct system is
properly connected. When you tune to XM channel 1, you should see "XM
Preview" on your head unit LCD, and hear that channel through your car
speakers. If not, check to make sure all connections are correct or refer to the
troubleshooting section of this installation guide.
Step 4
Mount and secure the PIA in a suitable location that will not interfere with
the radio and will not vibrate or rattle after installation.