Warranty; Cutting Extended Lip - Hayward SHEER 500 Guide D'utilisation

To original purchasers of this equipment, Hayward Pool Products, Inc. warrants its SHEER to be free from defects in materials and workmanship for a
period of ONE (1) year from the date of purchase, when used in single family residential applications.
The limited warranty excludes damage from freezing, negligence, improper installation, improper use or care or any Acts of God. Parts that fail or
become defective during the warranty period shall be repaired or replaced, at our option, within 90 days of the receipt of defective product, barring
unforeseen delays, without charge.
Proof of purchase is required for warranty service. In the event proof of purchase is not available, the manufacturing date of the product will be the
sole determination of the purchase date.
To obtain warranty service, please contact the place of purchase or the nearest Hayward Authorized Service Center. For assistance on your nearest
Hayward Authorized Service Center please visit us at www.hayward.com.
Hayward shall not be responsible for cartage, removal, repair or installation labor or any other such costs incurred in obtaining warranty replacements
or repair.
The Hayward Pool products warranty does not apply to components manufactured by others. For such products, the warranty established by the
respective manufacturer will apply.
The express limited warranty above constitutes the entire warranty of Hayward Pool Products with respect to its pool products and is in lieu of all other
warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose. In no event shall Hayward Pool products be
responsible for any consequential, special or incidental damages of any nature.
Some states do not allow a limitation on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
*Supersedes all previous publications.
Cutting The Extended Lip
The extended lip (6") models can be cut to custom shapes depending on the application. Determine how much of
the lip is to be removed, allowing for room for the tile and thin set such that the lip will protrude a minimum of
3/8" beyond the final finish of the wall. A minimum length of 1 ½" on the lip must remain after cutting and
finishing. Remove the Grout Guard before cutting the lip. Cut carefully to avoid creation of jagged edges on the
lip. Use the rib removal tool to remove the ends of the exposed ribs, back from the cut edge, to provide about 1"
of clearance. Remove all broken pieces from the SHEER. Sand, or use a flame on the edge to provide a smooth
surface. Replace the Grout Guard.
HAYWARD Pool Products Limited Warranty
®
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Hayward Pool Products Canada
Hayward Pool Products
620 Division Street
Elizabeth, NJ 07207
2880 Plymouth Dr.
Oakville, ON L6H 5R4
7