• Using the supplied brush 8 (fig. A), remove hair:
– from the internal part of the appliance (fig. F);
– from the ends of the blade (fig. F1);
– from between the fixed blade A and mobile blade B: to lift the blade apply
downward pressure on the cleaning lever C (fig. F2) .
Cutting head assembly
Position the adjustment ring height on 1.9 mm before hooking the
head onto the appliance.
• Make sure that the cutting height adjustment ring is set on 1.9 mm; if not, turn the
ring to the correct position before assembling the cutting head on the appliance
(fig. G).
• Place the special assembling hook into its compartment situated on the appliance.
• Push the head downwards and click the unit into its correct position (fig. G).
Lubrication
It is recommended to lubricate the blade unit daily or after every use.
To maintain perfect performance of the appliance over time, you are required to clean
the blade regularly (paragraph "Blade block cleaning") and proceed with lubrication.
• Remove the cutting head as indicated in the paragraph "Removing the cutting head. "
• Clean the blade block as indicated in the paragraph "Blade block cleaning".
• Apply two/three drops of lubricating oil 7 (fig. A) (you can also use oil for sewing
machines) in the gap between the fixed blade and the mobile blade (fig. H).
Failure to lubricate the appliance is considered as "FAILURE TO COMPLY WITH
THE INSTRUCTIONS FOR USE", therefore, the warranty will be automatically
rendered null and void.
Battery replacement
• Turn off the appliance and remove the power adaptor from the mains socket 9
(fig. A).
• Push the relevant release lever upwards and extract the battery by lifting it
upwards.
• Place the supplied supplementary battery into the relative compartment.
• Press the supplementary battery downwards until it is completely inserted (CLICK!)
DISPOSAL
The product packaging is made of recyclable materials. Separate the parts
according to their type and dispose of them in accordance with applicable
laws on the environmental protection.
INFORMATION FOR USERS
This product bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be
handledto the local collecting points or given back to retailer when you
buy a new product, in a ratio of one to one pursuant to European Directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on
the environment. Very small WEEE (no bbbexternal dimension more than 25
cm) can be delivered to retailers free of charge to end-users and with no
obligation to buy EEE of an equivalent type. For further information, please
contact your local or regional authorities. Electronic products not included in
the selective sorting process are potentially dangerous for the environment
16 and human health due to the presence of hazardous substances. The
unlawful disposal of the product carries a fine according to the legislation
currently in force.
Disposing of the battery and power adapter
• Turn off the appliance.
• Remove the battery from its compartment.
Do not dispose of the battery and/or power adapter with normal
domestic waste.
This appliance contains NI-MH (metal-hydride) rechargeable batteries.
The end user is responsible for disposing of the batteries at a special
waste collection centre.
15