Publicité
whenever it is damaged or develops surface
whenever it is damaged or develops surface
whenever it is damaged or develops surface
cracks.
Do not pull or pierce the hose. Keep away
Do not pull or pierce the hose. Keep away
Do not pull or pierce the hose. Keep away
from any parts of the appliance that get hot.
from any parts of the
Fitting the tubing: follow the assembly
Fitting the tubing:
instructions supplied with the flexible tubing
instructions supplied with the flexible tubing
instructions supplied with the flexible tubing
and collars.
Check for gas leaks following the instructions
leaks following the instructions
leaks following the instructions
in paragraph D.
.
The barbecue is equipped with a circular
The barbecue is equipped with a circular
The barbecue is equipped with a circular
connector. It should be used with flexible
connector. It should be used with flexible
connector. It should be used with flexible
hose that is suitable for use with butane and
hose that is suitable for use with
hose that is suitable for use with
propane gas. Hose length should not exceed
propane gas. Hose length should not exceed
propane gas. Hose length should not exceed
1.20 metre. It should be replaced if it is
1.20 metre. It should be replaced if it is
1.20 metre. It should be replaced if it is
damaged or cracked, when required by
damaged or cracked, when required by
damaged or cracked, when required by
national regulations or at the end of the part
national regulations or at the end of the part
national regulations or at the end of the part
lifecycle. Do not pull or pierce the hose.
lifecycle. Do not pull or pierce the hose.
lifecycle. Do not pull or pierce the hose.
Keep away from any parts of the barbecue
Keep away from any parts of the
Keep away from any parts of the
that get hot. Check that the flexible hose
that get hot. Check that the flexible hose
that get hot. Check that the flexible hose
stretches out normally, without twisting or
stretches out normally, without twisting or
stretches out normally, without twisting or
pulling.
Check for gas leaks following the instructions
leaks following the instructions
leaks following the instructions
in paragraph D.
.
The barbecue should be used with flexible
The barbecue should be used with flexible
The barbecue should be used with flexible
tubing that is suitable for use with butane and
s suitable for use with butane and
s suitable for use with butane and
propane gas. Hose length should not exceed
propane gas. Hose length should not exceed
propane gas. Hose length should not exceed
1.50 metre. It should be replaced if it is
1.50 metre. It should be replaced if it is
1.50 metre. It should be replaced if it is
damaged or cracked, when required by
damaged or cracked, when required by
damaged or cracked, when required by
national regulations or at the end of the part
national regulations or at the end of the part
national regulations or at the end of the part
lifecycle. Do not pull or pierce the tubing.
lifecycle. Do not pull or pierce the tubing.
lifecycle. Do not pull or pierce the tubing.
Keep away from any parts of the barbecue
way from any parts of the barbecue
way from any parts of the barbecue
that get hot. Check that the flexible hose
that get hot. Check that the flexible hose
that get hot. Check that the flexible hose
stretches out normally, without twisting or
stretches out normally, without twisting or
stretches out normally, without twisting or
pulling.
that get hot.
follow the assembly
Flexible tubing connection: to connect the
Flexible tubing connection
tubing to the connector on the barbecue,
tubing to the connector on the barbecue,
tubing to the connector on the barbecue,
tighten the nut on the tubing firmly but
tighten the nut on the tubing firmly but
tighten the nut on the tubing firmly but
without excess force using the two
without excess force using the two
without excess force using the two
wrenches provided:
wrenches provided:
• no. 10 wrench to tighten the connector
wrench to tighten the connector
wrench to tighten the connector
• no. 17 wrench to tighten the nut on the
no. 17 wrench to tighten the nut on the
no. 17 wrench to tighten the nut on the
tubing
Connect the other end to the regulator outlet
Connect the other end to the regulator outlet
Connect the other end to the regulator outlet
Connect the other end to the regulator outlet
union.
union.
Check for
heck for gas leaks following the instructions
leaks following the instructions
leaks following the instructions
in paragraph
in paragraph D.
If replacing an empty cylinder, read Section
If replacing an empty cylinder, read Section
If replacing an empty cylinder, read Section
If replacing an empty cylinder, read Section
D): «Removing or changing the gas cylinder».
D): «Removing or changing the gas cylinder».
D): «Removing or changing the gas cylinder».
D): «Removing or changing the gas cylinder».
When installing or removing a gas cylinder,
When installing or removing a gas cylinder,
When installing or removing a gas cylinder,
When installing or removing a gas cylinder,
always operate in an open, well
always operate in an open, well-ventilated
always operate in an open, well
place, never in the presence of a flame, spark
place, never in the presence of a flame, spark
place, never in the presence of a flame, spark
place, never in the presence of a flame, spark
or any other source of heat (cigarette,
or any other source of heat (cigarette,
or any other source of heat (cigarette,
or any other source of heat (cigarette,
electrical appliance, etc.), and away from
electrical appliance, etc.), and away from
electrical appliance, etc.), and away from
electrical appliance, etc.), and away from
other persons or inflammable materials.
other persons or inflammable materials.
other persons or inflammable materials.
- Position the gas cylinder on the ground,
Position the gas cylinder on the ground,
Position the gas cylinder on the ground,
Position the gas cylinder on the ground,
behind or beside the appliance.
behind or beside the appliance.
behind or beside the appliance.
- Close the regulator or gas cylinder valve.
Close the regulator or gas cylinder valve.
Close the regulator or gas cylinder valve.
Close the regulator or gas cylinder valve.
- Screw or click the regulator onto the
Screw or click the regulator onto the
Screw or click the regulator onto the
Screw or click the regulator onto the
cylinder or onto the gas cylinder valve.
cylinder or onto the gas cylinder valve.
cylinder or onto the gas cylinder valve.
- Close the stove valves by turning the knobs
Close the stove valves by turning the knobs
Close the stove valves by turning the knobs
Close the stove valves by turning the knobs
clockwise, position (
clockwi
- Check that the tubing lies normally, without
Check that the tubing lies normally, without
Check that the tubing lies normally, without
Check that the tubing lies normally, without
twisting or stress.
twisting or stress.
- Check that the burner tube air holes at the
Check that the burner tube air holes at the
Check that the burner tube air holes at the
Check that the burner tube air holes at the
injector are not obstructed by dust or
injector are not obstructed by dust or
injector are not obstructed by dust or
injector are not obstructed by dust or
spider's webs.
spider's webs.
Do not check for leaks using a flame. Use a
Do not check for leaks using a flame. Use a
Do not check for leaks using a flame. Use a
Do not check for leaks using a flame. Use a
gas leak detecting liquid
gas leak detecting liquid.
gas leak detecting liquid
: to connect the
ventilated
).
Publicité
