AEG SCS51400S0 Notice D'utilisation page 41

1. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge. Make
sure that the clearance between the ap-
pliance and the cupboard is 4 mm.
2. Adjust the appliance in the niche.
The plastic spacer (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen
furniture is correct.
Open the door. Put the plastic spacer in
position.
3. Attach the appliance to the niche with 4
screws.
Installation
4mm
44mm
41
2
1
I
I