MJS PULSE PRESS SOLO Serie Mode D'emploi page 4

1
1
4 56
1
3 4 5
2 3
4
2 3
7
2
6 7
MINI 3 CONTROLS
1. Pressure Control: This sets the air pressure in the
garments to that stated on the front panel in mmHg.
2. Air Outlet: This is where the air tube is attached.
3. Power Switch: This turns the unit on and off. The unit
starts cycling as soon as power in turned on.
4. Power Inlet: This is where the power cable is
plugged in.
multi 3 PRO CONTROLS
1. Pressure Control: This sets the air pressure in the
garments to that stated on the front panel in mmHg.
2. Pressure Meter: This displays the pressure in the
garment at all times in the cycle.
3. Deflate Timer Control: This sets the deflation time
cycle, in seconds.
4. Air Outlet: This is where the air tube is attached.
The unused air outlet is plugged. Unplug for second
garment.
5. Power Inlet: This is where the power cable is plugged
6. Power Switch: This turns the unit on and off. The unit
starts cycling as soon as power in turned on.
7. Inflate Timer Control: This sets the inflation time
cycle, in seconds.
MULTI 6 CONTROLS
1. Power Switch: This turns the unit on and off. The unit
starts cycling as soon as power in turned on.
2. Pressure Meter: This displays the pressure in the
garment at all times in the cycle.
3. Air Outlet: This is where the air tube is attached. Both
outlets are self sealing and neither has priority.
4. Power Inlet: This is where the power cable is plugged
5. Pressure Control: This sets the air pressure in the
garments to that stated on the front panel in mmHg.
6. Deflate Timer Control: This sets the deflation time
cycle, in seconds.
7. Inflate Timer Control: This sets the inflation time
cycle, in seconds.