Be Cool Jupiter Mode D'emploi page 53

Siège d'auto
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 62
Securing your Child in the ISOFIX car seat
Rearward Facing
18.
1-Pull the ISOFIX extent strap and push seat body
make sure rebounce bar staty firmly of bacrest of
vechile seat.
19.
Press the webbing adjustment button, while
pulling out the shoulder harnesses to the proper
length.
19.
1-Adjustment webbing.
20.
Press the red button to disengage the buckle.
Fix the buckles on the both sides of seat to make
21.
placing the baby more convenient.
22.
Place the child into the car seat and pass both
arms through the harnesses.
23.
The shoulder harness height must be even
with the child's shoulders. ! After the child is seated,
re-check whether the shoulder harnesses are at
the proper height. After the child is seated, re-check
whether the shoulder harnesses are at the proper
height.
Engage the buckle.
24.
25.
Pull down the adjustment webbing and adjust it
to the proper length to make sure your child is snugly
secured.
! Make sure the space between the child and the
shoulder harness is about the thickness of one hand
lay flat on children's chest.
Toddler Mode (Forward Facing Mode)
Forward Facing 1-4 years old
Recline position Position 1-3
! Please install the car seat on the vehicle seat
26-27.
1-Pull the ISOFIX extent strap and push seat
EN
53

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7022 y727022 y737022 y74

Table des Matières