General Installation Notes - Auer Signal BEL Notice De Montage

GENERAL INSTALLATION NOTES

Installation must be carried out in accordance with the latest codes and regulations
-
by a qualified electrician.
If the equipment is used in a manner not specified by the manufacturer, the
-
protection provided by the equipment may be impaired.
Environmental exposure conditions during installation should be dry, not moist or
-
wet.
Ensure power is disconnected prior to installation or maintenance to avoid electric
-
shock.
Never energise the bell with the gong removed.
-
To maintain good serviceability the bell must be mounted with the solenoid striker
-
upwards.
Avoid mounting the bell where it will be subject to excessive vibration.
-
BEL V1.1 Seite 8