Step 7: Connecting To Pasm - Promise Technology SmartStop NS2300N Guide De Démarrage Rapide

Step 7: Connecting to PASM

The Promise Advanced Storage Manager (PASM) software is factory-installed on
the SmartStor system. PASM runs in the browser on your PC. You can access
PASM:
• Directly in your browser (page 12)
• Through SmartNAVI (page 13)
Browser Support
Choose one of the following browsers to use with PASM:
• Internet Explorer
• Mozilla
• Firefox
Finding the SmartStor's IP Address
To access the SmartStor in your browser, you must know the SmartStor's IP
address. Use SmartNAVI for this purpose.
1. Right-click the SmartNAVI icon in the Windows
application tray (lower right corner of the screen).
2. Choose Open SmartNAVI from the popup menu.
The SmartNAVI MSN window appears with the NAS
List displayed. The IP address of the SmartStor shown in the NAS List.
For more information about SmartNAVI, see Chapter 4 of the SmartStor
NS2300N User Manual on the CD.
•
•
IP address of the SmartStor
detected on the network
11
Step 7: Connecting to PASM
Netscape Navigator
Safari (Mac OS X)
SmartNAVI icon