Auto Power On / Off - Sylvania CADRE PHOTO NUMERIQUE Manuel De L'utilisateur

1. Remove USB stick from the DPF, if inserted, then power on your DPF.
2. Connect the small end of the USB cable to DPF's Mini USB port, and the larger
end to an available USB port on your computer.
3. Once connected, the frame will display Connected to Computer.
4. The internal memory and each memory card present in the DPF will be associated
with one disk drive on your PC.
5. Double-click the desired drive to display the files on the card.
6. To copy files from a media source, select and drag them into the DPF's internal
memory drive
7. Similarly, to copy files from your computer to the internal memory, first locate
the files on your computer, select the files you want to copy, and then drag and
drop them into the DPF's internal memory drive.
8. When finished, disconnect DPF from Windows PC.
WARNING:

12. AUTO POWER ON / OFF

You can schedule the DPF to automatically go into a "stand-by" mode and resume
operation according to your selected repeat mode.
1. On the HOME screen, press
2.
On Settings menu, use
3. On System Setup menu, use
or change field values:
Auto Power On:
Auto Boot Time:
Auto Power Off:
Auto Shut Time:
Auto-Power Repeat:
4. Press
Do not unplug or switch off the DPF when files are being transferred,
as that can seriously damage the memory.
to select System Setup, then press ENTER.
Set on or off the Auto-Power-On function.
Set your desired time for the DPF to power on
automatically.
Set on or off the Auto Power Off function.
Set your desired time for the DPF to power off
automatically.
Select repeat mode for Auto Power Function.
to save the settings and exit.
to select Settings and then press ENTER.
to select the options, use
16
to select