Helite B'SAFE Manuel D'utilisation page 11

STEP 2: INSTALL THE SADDLE SENSOR ON THE BICYCLE
1.
Choose the right bracelet size
Try the different sizes. The right size has to
be adjusted to the bicycle frame.
The big screw has to pass through.
#1 #2
30mm 34mm
3.
Place the sensor on the bicycle
!
• Place the sensor on the bicycle frame on the seatpost or on the seat
tube. Make sure that nothing will impact the sensor during the installation
(bike lock, water bottle, etc.).
User Guide - Saddle Sensor
All manuals and user guides at all-guides.com
2.
Assemble the sensor and the bracelet
• Install the sensor on the bracelet by sliding it inside. The two arrows have to be
aligned.
• When the sensor is aligned, screw in the small screw to fix the two elements.
This step is optional if you want to be able to take off the sensor from the bracelet.
#3
38mm
Make sure to thoroughly clean your bicycle frame before installing the sensor.
• Screw in the big screw.
Do not tighten too much. You can stop to screw when
it gets difficult to turn the sensor with your hand.
20
21