Magnetic Table - Schick Dental S2 Master Mode D'emploi

23

7.2 magnetic table

39
5
Direction of rotation of milling spindle
To change direction of rotation of milling spindle use switch
„Motor - R/L" (5). If motor is running the direction right or left is shown
through a green light in the switch. It is also possible to change the
direction of rotation when motor is running.
magnetic platform
16
To fix the model table or other accessories in the center of the
magnetic platform an electro-magnet is placed (16) which is operated
via the switch „Magnet EIN/AUS" (see page 7; no. 3).
To clear the platform you can easily take away the particles with a brush
through the paralle grooves.
11
Operation