First Use; Operating Modes - Seecode 232836 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Keep a distance of at least 100 cm from the wall or other objects.
Please remove jewellery, mobile phone or other valuables or keys or other sharp objects before use to avoid damage or injury.
To avoid injury, do not jump or kneel on the unit while it is running.
Only one person may stand on the unit at a time.
Do not put weight on one side of the unit because of the risk of tipping.
Do not place other equipment or objects on the unit in addition to your own weight.
If the power supply fluctuates, do not use the unit and unplug it immediately.
Keep the unit away from damp places and direct sunlight; do not leave it outdoors.
Always keep the unit away from contact with liquids. Do not touch with wet hands, do not jerk the appliance and do not smoke while using
it.
If there is a problem with the power switch, do not touch the appliance to avoid electric shock.
Do not use the appliance if the room temperature is above 40°C.
Connect the appliance only to a power supply that complies with the specifications. Operate the power switch carefully.
Do not bend the cable or touch it with wet hands.
Stop using the appliance if there is a storm or thunderstorm outside; unplug the appliance immediately if there is a storm.
To avoid electrical interference, do not connect appliances that require a lot of power to the same socket as the appliance.
Do not store flammable substances near the appliance.
Do not mix new batteries with old ones or batteries of different brands in the remote control.
Technical data
Size 67.0 x 38.0 x 14,0 CM
Weight 12.5 KG
Power 200W
Input 220V 50Hz
Frequency 5 to 15Hz
Control Mode PWM CONTROLLER
[DC MOTOR DRIVER]

FIRST USE

Make sure the unit is placed on a flat, stable and level surface, at least 100cm away from walls or objects.
If you are using the unit for the first time, you should sit on a chair and place your feet on the unit. Now switch on the machine to test the
intensity of the movements; this will allow you to get used to the vibrations and the selected operating mode.
Be sure to wear comfortable clothing and shoes when exercising.

OPERATING MODES

The SEECODE fitness vibration plate gives you two operating modes to choose from:
manual and automatic. You can use the resistance bands in both modes. To use the resistance bands, attach the carabiner to the holes provi-
ded in the brackets at the front of the vibration plate.
Before using the pull ropes, always check the proper attachment of the resistance bands by means of the carabiners.
10

Publicité

Table des Matières
loading

Table des Matières