Care & Cleaning - Breville Diecast Smart Manuel D'instructions

CARE & CLEANING
14
CARE & CLEANING
CARE AND CLEANING
Remove the power plug from the power
1.
outlet and allow the toaster to cool
completely before cleaning.
To clean any crumbs from the toaster,
2.
remove the crumb tray, located under
the browning control slide at the front
of the toaster, by pulling it outwards.
Empty and replace the crumb tray
before using the toaster again. Replace
the crumb tray by sliding it inwards
until it locks into position.
To remove any additional crumbs, turn
3.
the toaster upside down over a trash bin
and shake crumbs free.
Wipe the outside of the toaster with a
4.
slightly dampened soft cloth then polish
with a soft dry cloth to dry completely.
NOTE
Do not clean with metal scouring
pads. Pieces can break off the pad
and touch electrical parts creating an
electric shock hazard.
STORAGE
Remove the power plug from the power
outlet and allow the toaster to cool
completely before storing. Follow the
directions for cleaning and store in an
upright position on a flat surface on a bench
top or in an accessible cupboard.
Do not store anything on top of the toaster.
WARNING
Do not use the toaster without the
crumb tray in position. Do not allow
crumbs to build up in the crumb
tray. Failure to clean the crumb tray
regularly may result in a fire hazard
and damage to the toaster.
15