Multimetrix XA 1525 Notice De Fonctionnement page 10

General Instructions (cont'd)
Safety features
Guarantee
Metrological
verification
Cleaning
Storage
Unpacking,
re-packing
10
The fuse protects the primary coil of the power supply transformer
against mains voltage errors.
Only use a fuse of the following type:
This equipment is guaranteed against any material or manufactu-
ring defects, in accordance with the general conditions of sale.
During the warranty period (1 year), the instrument can only be
repaired by the manufacturer, who reserves the right to repair the
instrument or to exchange all or part of it. If the equipment is
returned to the manufacturer, the outgoing transport costs are
borne by the customer.
The warranty is not applicable in the following cases:
1.
improper use of the equipment or use of it in conjunction with
incompatible equipment
2. modifications to the equipment without the explicit authorisation of the
manufacturer's technical department;
3. work carried out on the instrument by a person not approved by the
manufacturer;
4. adaptation for a specific application not included in the definition of
the equipment or the user's manual;
5. knocks, falls or flooding.
Like all measuring or testing devices, a regular check is necessary.
Return your instrument to your distributor for any work to be done
within or outside the guarantee.
Disconnect the instrument and then clean it with a cloth slightly
moistened with soapy water; leave to dry before using. Never use
abrasive products or solvents.
To guarantee correct operation of the power supply, after a period
of storage in extreme environmental conditions, wait for the
instrument to return to normal measuring conditions.
In particular, an abrupt change in the ambient temperature (cold to
hot) may lead to condensation inside the instrument and cause short
circuits.
Disconnect the unit if it should remain unused for quite a long time.
All the equipment has been checked both mechanically and
electronically before shipment.
Every precaution has been taken to ensure that you receive the
instrument undamaged. However, it is a good idea to check quickly to
detect any damage that may have occurred during transport.
If there is any damage, immediately notify the transporter of the
customary reservations.
If you ship this instrument on elsewhere, use preferably the original
packaging and indicate the reasons for reshipment as clearly as
possible in a note enclosed with the equipment.
T 1.5 A / 250 V for XA 1525
T 2 A / 250 V for XA 3051
Single Output Power Supplies
English