ADEO Services EMT449ETR-F Notice D'instructions page 7

D. Week & Time Setting
1. Week Setting
1.1 Press and hold the SET Button until the week display flashes, which indicates setting is ready
1.2 Press ∧+ Button to increase the day, or ∨－ Button to reduce the day, the sequence of the display is shown
as follows:
MoTuWeThFrSaSu
1.3 Press ∧+/∨－Button once will increase or reduce the day by sequence slowly. To press and hold the button,
the week display moves quickly. Release the button until your desired day of the week shown on the display. Press
SET Button to confirm your setting.
2. Time Setting
2.1 After setting the day of the week, hour display flashes to indicate setting time can be started
2.2 Press ∧+Button to increase number of hour, or ∨－ Button to reduce hour.
2.3 Press ∧+/∨－Button once will increase or reduce each hour slowly. To press and hold the
display moves quickly. Release the button until your desired hour shown on the display. Press SET Button to
confirm your setting.
2.4 "Minute" display then flashes to indicate setting minute is ready. Repeat the same procedures in setting hour as
in #2.2 and #2.3 to set minutes.
3. Summer Time Setting
3.1. Press CLOCK Button and ∨－ Button at the same time to change to summer time, time display automatically
adds one hour and "S" is shown on the LCD.
3.2. By pressing Clock Button and ∨－ Button again to cancel the summer time setting.
Noted:
LCD must be in real time display to start week and time setting. If LCD is in program setting display, press CLOCK
Button once to return to real time display.
E. Program Setting
1. When the LCD is in real time display, press ∧+ Button once to change to program setting display, "1ON" will be
shown on the lower left corner of the LCD:
1.1 "1" indicates the program group's number (program group is from 1 to 14)
1.2 "ON" indicates power on time.
1.3 "OFF" indicates power off time
2. To chose the program group and on/off status, press ∧+ Button to increase the group number, sequence as
follows:
1ON1OFF ...... 20ON20OFF d ON/OFF (for countdown)
3. To reduce the program group number, press –Button, LCD displays in the following sequence:
d ON/OFF (for countdown)20OFF20ON ...... 1OFF1ON
4. After choosing the program group, then can set the week and time. Press SET Button until the week display
button, the hour
7