Kalorik RVC 47730 BK Mode D'emploi page 13

NOTE:
Please clean the dust container and suction channel every time
‒
after sweeping.
When cleaning the dust container with water, make sure to let it dry
‒
naturally, but not under the sun. As soon as it is thoroughly dried, it
should be put back into the robot vacuum to prevent affecting the
functions and life of the appliance.
If any of the filters are damaged, they need to be replaced as soon
‒
as possible to prevent affecting the effectiveness of dust removal.
Cleaning the Sensors
Use a soft damp cloth to wipe the sensors gently on both the unit and the
charging base. See the following image for reference on where the sensors
are located.
Electrode
Sensor
www.KALORIK.com
Sensor
Charging
connectors
13
RVC 47730 BK - 200605