Menu Functions - METRICA 60290S Mode D'emploi

3. The measuring result will stay on the screen for 7 sec after
the trigger is loosen and the tool will be powered off if no
operation is done.
notice: Press the "MODE" button for 2 sec when the instru-
ment is on in order to change between °F and °C.
Dual laser spot
Dual laser distance is within 120cm.
At this distance, the temperature measuring area has a diameter
of 10 cm.
Dual laser's on and off
1. Press and loose the trigger (4)
2. When "hold" is displayed, press the laser backlight button:
- 1 time to switch on the backlight
- 2 times to power on and off the laser
3. The laser function remains active until another mode is se-
lected.
Max Temperature display
The max temperature is displayed with "MAX" after the tempe-
rature measurement is finished.
Backlight
1. Press and loose trigger (4).
2. Press the backlight button when the screen shows "hOlD" to
switch the backlight on/off.
3. When the backlight is on, the instrument will power on.
4. The backlight remains active until another mode is selected.
When the display shows "hOlD" press up and down button to
adjust emissivity.
The emissivity of this instrument is between 0.1-1.0.
notice: Backlight consumes the battery power. Turn it off when
you don't need it.

menu functionS

1. The following data chosen: max value, min value, average
value, max alarm point, min alarm point.
2. Press and loose the trigger when it shows "hOlD".
Press the "MODE" key to enter the next program.
- Max data
Only shows the max data when measuring.
- Min data
Only shows the min data when measuring.
- Difference data
Shows the difference between the first and subsequent data.
- Average data
Shows the average between the first and subsequent data.
- HAL
To set the max temperature alarm, press the up and down menu.
9