Whirlpool IM9 Manuel D'utilisation page 14

E021001CW
5. spin 500 rpm (1')
6. cold rinse (3')
7. spin 500 rpm (1')
8. cold rinse with softner (3')
9. spin 1000 rpm (3') *:
10. anti-wrinkle rolling
PROGRAMME 2
1. Pre-wash 35°C (3')
2. spin 500 rpm (1')
3. wash 60°C (5')
4. rinse cold (3')
5. spin 500 rpm (1')
6. rinse cold (3')
7. spin 500 rpm (1')
8. cold rinse with softner (3')
9. spin 1000 rpm (3') *:
10. anti-wrinkle rolling
PROGRAMME 3
1. Pre-wash 35°C (3')
2. spin 500 rpm (1')
3. wash 40°C (5')
4. rinse cold (3')
5. spin 500 rpm (1')
6. rinse cold (3')
7. spin 500 rpm (1')
8. cold rinse with softner (3')
9. spin 1000 rpm (3') *:
10. anti-wrinkle rolling
PROGRAMME 4
1. Cold pre-wash (3')
2. Wash 30°C (5')
3. Cold rinse (3')
4. Spin 500 rpm (1')
5. Cold rince (3')
6. Spin 500 rpm (1')
7. Cold rinse with softner (3')
8. Spin 1000 rpm (3') *:
9. Anti-wrinkle rolling
PROGRAMME 5 (WOOL)
1. Cold pre-wash (3')
2. wash 30°C (3')
3. Cold rinse (3')
4. Cold rince (3')
5. Cold rinse with softner (3')
6. Spin 450 rpm (1')
7. Anti-wrinkle rolling
PROGRAMME 6 (COLD)
1. Cold pre-wash (3')
2. Spin 500 rpm (1')
3. Cold wash (3')
4. Cold rinse (3')
5. Spin 500 rpm (1')
6. Cold rinse (3')
7. Spin 500 rpm (1')
8. Cold rinse (3')
9. Spin 1000 rpm (3') *:
10. Anti-wrinkle rolling
*:for the low spin washing machines, also the high
spin ones, are at 500 rpm.
17. DISPLAY MESSAGES
In the scheme below we point out the messages,
that can appear on the display of IM9. We suggest
you to provide for the maintenance of the machine
only applying
technicians.
MESSAGGE
AL 1
AL 2
AL 3
AL 4
AL 5
AL 6
AL 10
bL
COOLING
DETERGENT
END TEMP
END H2O
END
H2O
14
to authorised and
MEANING
It appears in case of overheating
of the motor. Please call the
Technical Assistance Service
Will be displayed if door opened
during programmes execution
Call assistance service.
It appears in case of damage of
the temperature probe
Will be displayed when max
allowed water loading time is
over. Call for assistance.
Will be displayed when max
allowed water outlet time is over.
Call for assistance.
It appears only in coin op
versions: when a coin is fit-in, in
the coin.
It appears when one or more
panels of the machines are open
for maintenance
perimetrical stroke, when it is
present).
It appears during the anti-wrinkle
rolling cycle, immediately after
one unbalance.
It appears during the cool-down
(par. 9).
It appears when the detergent
must be loaded; the display will
show it all the time when it is
possible to make this operation.
It appears when at programme
ending when the
temperature is higher than 40°C.
It disappears only when the
temperature is under this limit.
It appears when
programme ending the water
level is higher than 5 cm. It
disappears when the water has
been completely unloaded.
It appears when the programme
has been completed. The door
can be opened in order to take
out the linen.
It appears by pressing the
START key; the display will
show it all the time when the key
26/11/04
qualified
(end of
water
at the