Choosing The Proper Location; Installing The Rear Spacers - LG LRBNC1104 Serie Mode D'emploi

10 INSTALLATION

Choosing the Proper Location

Electricity
Use an individual, grounded outlet:115 Volts, 60 Hz,
AC, 15 Amps minimum.
WARNING
• Do not overload house wiring and cause a
fire hazard by plugging in multiple appliances
in the same outlet with the refrigerator.
• To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp area.
Flooring
To avoid noise and vibration, the unit must be
installed and leveled on a solidly constructed floor.
If required, adjust the leveling legs to compensate
for the unevenness of the floor.
NOTE
• Installing on carpeting, soft tile surfaces, a
platform or weakly supported structure is not
recommended.
Ambient Temperature
Install this appliance in an area where the
temperature is between 55 °F (13 °C) and 110 °F
(43 °C).
If the temperature around the appliance is too low
or high, cooling ability may be adversely affected.

Installing the Rear Spacers

This feature is only available on some models.
• There are 2 rear spacers included with the
accessory kit inside the appliance. Install the
spacers on the upper corners at the back of the
appliance.
NOTE
• The spacers help improve the energy efficiency of
the appliance by providing clearance between the
back of the appliance and the wall. This allows for
improved air circulation.