Fitting The Tool Caddy - Euroflex Monster SC60 Superclear Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1. Locate the two plastic headed screws be-
neath the back of the unit and remove them
by unscrewing anticlockwise.
3. Re-fi t the two plastic headed screws through
the fi xing lugs into the two screw holes turning
clockwise until hand tight.

Fitting The Tool Caddy

The Tool Caddy is now fi tted to the Steam Cleaner
2. Hook the top front of the caddy over the
two hooks on the reverse of the Monster 60
SuperClean and push the bottom part of the
caddy under the body of the cleaner so that
the holes in the fi xing lugs match the holes for
the plastic screws.
29

Publicité

Table des Matières
loading

Table des Matières