Use; Device Overview; Operation - Intenso BSA1 Mode D'emploi

USE

Device overview

Operation

1. LED Status display
The current operating state of the device is displayed via the status LED. The LED glows blue
continuously as soon as the charging procedure starts. If the LED is off, the charging procedure is
finished or there is no Qi-capable terminal device for charging on the inductive charging station.
If the LED blinks blue, there is an error, for example the device has become too warm, there is a
foreign body between the devices or a non-compatible power supply is being used.
2. Starting-Up / Charging Connected Devices
Step 1: Preparation
Connect the supplied USB A to Type C cable with the USB C port (IN) of the inductive charging
station and connect the other end of the USB cable with a USB power supply. Next connect the
power supply with a socket (please observe the above safety instructions for this).
Step 2: Start charge procedure
Position your Qi-capable device on the inductive charging station. You can position your device
horizontally or vertically. The charging procedure starts automatically and the status LED glows
blue continuously.
If this is not the case, please check whether:
a) There is a foreign body between the devices.
b) You have selected a compatible adapter.
c) Your device is Qi-compatible.
d) The cable ends and the adapter are connected correctly.
Step 3: Complete charge procedure
To complete the charge procedure, simply remove your device from the inductive charge station.
1 - IN
EN - Page 3 of 6
2 - Status LED