Setting Up The Indicator - Tru-Test 5000 Serie Guide De Démarrage Rapide

Setting up the indicator

5
The first time that you turn on the indicator, follow the step by step instructions to set
the language, country, date and time.
When shipped, the indicator is set up to manually record animal weights and IDs,
without drafting. You should change the way that the indicator is set up to suit the
task that you are about to perform.
Applying a favourite setup
Favourite setups are saved configurations that change the settings of the indicator to
suit a particular purpose. The indicator comes pre-loaded with various favourite
setups such as 'Weigh with EID' (weigh animals and record EIDs at the same time).
When you start a new session you have the option to apply a favourite setup. In the
New Session screen, press .
Recording information
For more information about sessions, see on page 6.
Further modifying settings, if desired
After you have applied a favourite setup, you can further modify any of the settings, if
desired.
To modify the settings, from the Home screen, press .
You can also change the information that you would like to see on the Weigh screen
during weighing.
To set up the Weigh screen, from the Settings screen, press .
Tip:
After you have changed any of the settings, you can save these settings as your
own customised favourite setup. It will then be possible to apply this favourite setup
next time you want to do the same task.
5