Klarstein METROBREEZE NEW YORK SMART 12K Mode D'emploi page 30

EN
30
Step 3: Screw the exhaust pipe assembly (exhaust joint end) into the rear
panel exhaust port (counter clockwise).
Step 4: Place the exhaust pipe assembly (exhaust flat port) into the window
sealing plate assembly and fix it with screws.
Important Hints on Installation
• The smoothness of exhaust pipe is very
important. Incorrect installation will affect
the operation of air conditioners.
• In installation, avoid the exhaust pipe
bending substantially.
• Ensure the air flow smoothly inside the
pipe.
• The exhaust pipe length is specially
designed for this model, do not arbitrarily
replace or extend it, or it will lead to
failure easily.
• The maximum developed length of
exhaust pipe is 1500mm. shorten its
length as far as possible in use. It's
recommended to keep it in level in
installation.