Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
A
ffordAble
S
P
afety
recautionS
To ensure safe operation, read the following statements and
understand their meaning. This manual contains safety precautions
which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTE
Note is used to notify people of installation, operation, or
maintenance information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others.
To reduce risk of injury or damage to the unit:
„ Plug only into grounded electrical outlets matching the nameplate rated
voltage.
„ Unit should only be used in a flat, level position.
„ Unplug unit and let it cool before cleaning or moving.
„ Do not spray controls or outside of unit with liquids or cleaning agents.
„ Unplug when not in use.
„ Keep unit and power cord away from open flames, electric burners or
excessive heat.
„ Do not operate unattended.
„ Closely supervise units operating in public areas and/or around
children.
„ Do not use food pans deeper than 4" (10 cm).
„ Do not operate if unit has been damaged or is malfunctioning in any
way.
„ Do not place any objects inside the air intake or exhaust panels.
„ Do not place weight on controls.
„ Do not operate hot well without water.
f
P
unction and
urPoSe
This unit is intended and designed to keep food at proper serving
temperatures. Hot food stations are not intended or designed to cook raw
food or to reheat prepared food. Cold food stations are not intended or
designed to cool or chill food. Food must be prepared and placed in food
stations at proper serving temperatures.
2
O
'
M
peratOr
s
P
b
e
ortAble
uffet
anual
quiPment
u
nPacking the
Carefully remove crating or packaging materials from the unit. Dispose of all
packaging, materials in an environmentally responsible manner.
e
P
lectrical
Free the power cord from its secure shipping location. It is usually coiled
inside the cabinet.
NOTE:
When moving or transporting this unit use caution to not damage the
electrical power cord.
l
i
ighting
nformation
If lighting is used, it is recommended that plastic coated type lamps or
equivalent are used to reduce the possibility of breakage.
B
g
reath
uard
Some units are shipped with a breath guard not installed. To install the breath
guard follow these steps:
1. Install the breath guard uprights (A) to the studs (B) securing with cap
nuts (C) as shown. See Figure 1. Repeat for all four uprights.
C
E
C
A
Figure 1. Breath Guard Installation
2. Install the breath guard support tube (D) between the uprights (A)
securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the top breath protector (E) securing with screws (F) and cap nuts
(C) as shown. Repeat for all four mounting locations.
4. Install the side breath protector (G) to the support tube (D) securing with
cap nuts (C) as shown. Repeat on the other side.
e
i
S
quiPment and
nitial
etuP
c
(
)
ower
ord
Some modelS
(
)
Some modelS
i
(
nStallation
Some modelS
A
F
B
B
C
B
D
A
)
A
C
G
C
Publicité
Table des Matières
