Grundig SIS 8670 Mode D'emploi page 29

Masquer les pouces Voir aussi pour SIS 8670:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
CLEANING AND CARE _____________________
Cleaning
Warning
Do not soak the steam station
other liquids. Never put vinegar, descaling
agent, laundry starch, perfume or other
auxiliary products that help ironing into the
appliance.
Do not use gasoline, solvent and abrasive
cleaning agents or hard brush to clean the
appliance.
Do not wash your appliance under running
water or do not soak it in water or other liquids.
Do not use abrasive cleaning agents to clean
the soleplate
.
H
1
Switch off and unplug the appliance before
cleaning.
2
Wait for the appliance to cool completely.
3
Use a slightly damp cloth to clean the exterior
of the appliance. Then wait for it to dry
completely.
4
Wipe the sediments and residues on the
soleplate
with a slightly damp cloth or with
H
a soft, nonabrasive liquid cleaner if necessary.
1
Replacing the lime collecting
cartridge
in water or
B
Warning
1
Note
2
3
4
2
5
Do not use any descaling agents! They may
damage the appliance.
Do not purchase cartridge from places
other than the dealers and service centers. If
you do this, the cartridge will not fit into the
cartridge slot and will not operate. This causes
a breakdown in your appliance. Faults arising
from using wrong cartridge are not covered
under warranty.
"
" symbol will flash on the control panel
when the cartridge needs to be replaced.
J
The cartridge must be replaced after consuming
about 30 liters of water.
Soak the new cartridge in water for 5 minutes
in order to enhance its performance.
Before removing the old cartridge from its slot,
make sure that the sections surrounding the
cartridge is cold.
Slightly press and release to replace the cart-
ridge.
Remove the new cartridge from its package,
soak it in the water for 5 minutes and push it
in its slot.
1
2
ENGLISH
29

Publicité

Table des Matières
loading

Table des Matières