Antari Lighting and Effects IP-1500 Manuel De L'utilisateur page 8

Press the button
buttons
to chapter DMX512 settings for more information on DMX operation.
Switching the wireless function on and off
Press the button
buttons
"Wireless Off") and to reactivate it (indication "Wireless On").
2. Continuous operation
Press the button
indicates "Volume" followed by the value that was set in menu item "Volume Output".
To stop the fog output, press the button
3. Timer operation
In the timer mode, the fog machine will automatically emit fog. The time intervals,
duration and fog volume depend on the corresponding menu settings. Press the button
TIMER, to activate the timer mode. The display indicates the set time interval.
The unit counts down to 0 seconds and emits fog. To deactivate the timer mode, press
the button
4. Hibernate Mode
FUNCTION until the display indicates "DMX Address". Use the
UP and DOWN to adjust the DMX512 start address. Please refer
FUNCTION until the display indicates "Wireless On". Use the
UP and DOWN to deactivate the wireless function (indication
VOLUME, to activate continuous fog output. The display
TIMER again.
VOLUME once again.
8