Maintenance; Care And Maintenance - Baby Trend TJ50B Manuel D'instruction

MAINTENANCE

CARE AND MAINTENANCE

TESTING FOR PROPER WHEEl
INSTAllATION
WARNING:
check the double nut
locking system before each
use to ensure that the front
wheel is securely fastened
to the frame.
24) • Lift the front wheel off of the ground and
sharply strike the top of the tire (Fig. 24).
The wheel should not be loose or come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
25) • Remove footrest to access nut. You
can use a standard crescent wrench to
tighten the nut (Fig. 25).
DO NOT OVER TIGHTEN this can
cause damage to the wheel housing.
15
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
AlWAYS
Fig. 24
Fig. 25
FENDER
If adjustment or replacement is necessary:
26) • Line up the front fender and press onto
the front frame assembly (Fig. 26a).
• Insert the 4 screws through the underside
of the front frame assembly into the front
fender's plastic tubes. Tighten the screws
only until snug (Fig. 26b).
DO NOT OVER TIGHTEN.
SEAT PAD
• To clean the seat pad, use only mild
household soap or detergent and warm
water on a sponge or clean cloth.
OTHER
• Check your stroller for loose screws,
worn parts, torn material or stitching on
a regular basis. Replace or repair parts
as needed.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
MAINTENANCE
Fig. 26a
Fig. 26b
16