Uae Of The Preaet P1, P2 Et P3 - Adventys BWIC Guide D'utilisation

Uae of the preaet P1, P2 et P3

The user can allocate power selection from 25 to 3000W or to 25 to 3600W depend of
the version, to the 3 programmable touches P1, P2, and P3, regarding its most often
used power usages. The three selected power P1, P2, and P3, once memorized, can be
use right the way by the user, instead of selecting the powers with the (+) and(-)
controls.
To assign and memorize a level of power on one of those three touches P1, P2, and P3,
the user has to first adjust the level of power to be memorized (between 1 and 25),
with the touches (+) and (-).
Then, in order to memorize, the uaer ahouli d holid for tt li e tat 3 nonatop aeconda hia or
her finger on either P1, P2 , or P3 touchea. A "BIP" sound signal means that the power
is saved and memorized. You can change and memorized as many different power as
you like.
During usage, a simple touch on P1, P2, or P3 is enough to affect the level
of power desired (just like the touches (+) and (-) controls).
Display of specific message
The device is extremely safe. It makes a permanent control of the values of temperature and other
electric parameters to guarantee to the user the best level of performance and safety at every moment.
A flashing error code « Fx » can appear on the display to warn about a malfunctioning.
The code error flashing is effective as long as the user doesn't stop the device manuallyunplug and
replug the unit, and then relaunch the device using the « On/Off » touch.
If a code error becomes permanent without having the possibility of cancelling it by trying to relaunch
the device, it is advised to get in touch with the after-sales service specified by the retailer of the
product.
16