Chiesi Clenny A Family Care 4 Evolution Mode D'emploi page 8

SoftTouch face masks
Soft
biocompatible
material
Dispersion
Limiting Vent
During the inspiratory phase, the
tab, acting as a Dispersion Lim-
iting Device, bends inwards to-
wards the mask.
CLENNY A NASAL IRRIGATOR
®
Before each utilisation, wash your hands accurately and clean
the NASAL WASH SYSTEM and the accessories as described in
the paragraph "CLEANING, SANITISATION AND DISINFECTION".
The NASAL WASH SYSTEM and accessories are for personal use
only to avoid potential risks of transmitting infection.
During application, it is advisable to suitably protect yourself
from any dripping.
1. 1. Insert the atomiser (C6.3) into the nebulisation chamber
(C6.4.1). See the connection diagram.
2. 2. Put the solution (max 10 ml) into the nebulisation cham-
ber (C6.4.1)(fig. A).
3. Attach the separator (C6.2). Insert the nasal adapter (C6.1).
See the connection diagram.
4. Connect the nasal douche system to the device using the
tubing (B) and the fitting (C7). See the connection diagram.
5. Switch on the device.
6. Bring it to your nose, placing the hole of the adapter
against one nostril.
7. During treatment, it is better to close with a finger the nostril
where the NASAL WASH SYSTEM is not applied.
8. Operate the NASAL WASH by closing the delivery hole
(C6.5) (fig. B) while inhaling and release it before exhaling
(fig. B); in this stage, to help expel the mucus, blow gently
through the nostril being treated directly into the NASAL
WASH.
9. Repeat steps 6. through 8. for the other nostril, trying to
distribute the solution evenly between the two nostrils.
10. For children or anyone unable to correctly coordinate the
various parts from step 6. to step 8., we recommend al-
ternating the application between the nostrils every 20 seconds, leaving suitable
pauses to allow the mucous to be expelled.
11. The steps described above are useful for nasal irrigation using saline solutions. It
is advisable to carry out medicated treatments after an initial irrigation with saline
SoftTouch masks have an outer edge made of soft
biocompatible material that ensures excellent ad-
herence to the face, and is also equipped with an
innovative Dispersion Limiting Device. These distin-
guishing characteristic features allow better adhe-
sion of the mask to the face and, thus, proper intake
of the liquid to be nebulised (medical device and/or
the medicine prescribed by the doctor).
6
During the expiratory phase,
the tab, acting as a Disper-
sion Limiting Device, bends
outwards from the mask.
Watch the video tuto-
rial on how to assemble
the nasal irrigator
A
C6.3
C6.4.1
B
C6.5