Installation Instructions; Accessories; Required Tools - Dandy DPA060CB4WDB Manuel Du Propriétaire

INSTALLATION INSTRUCTIONS

ACCESSORIES

1. Air outlet adapter
2. Exhaust hose
3. Window slider adapter
4. 2 Bolts
5. Window slider A
6. Window slider B and C
7. Foam seal A (adhesive)
8. Foam seal B (adhesive)
9. Foam seal C (non-adhesive)
10. Security bracket and 2 screws
11. Drain hose
12. Remote control and batteries
1
2
3
4
5
6
7
8
9
10
11
12
All manuals and user guides at all-guides.com

REQUIRED TOOLS

1. Medium sized Phillips screwdriver
2. Tape measure or ruler
3. Knife or scissors
4. Saw (in the event that the window sliders need to
ASSEMBLING THE WINDOW KIT
1. Attach the air outlet adapter and the window
2. Insert the air outlet adapter into the lower
3. Measure the window opening where the window
4. If the length of the window requires all three
5. If the window opening is less that the minimum
3
be cut to size)
slider adapter onto either end of the exhaust
hose.
groove of the air outlet on the back of the
appliance. Ensure that the hook of the adapter
is aligned with the hole seat of the air outlet and
then slide down
kit will be installed. Assemble as many sliders as
necessary to fi t the window.
sliders, use two bolts to fasten the sliders at the
correct length.
length of a single slider, use the slider that has
the hole in it and cut it to the correct length.
Make sure not to cut the end that has the hole
as this is necessary to attach the exhaust hose
adapter.
1
2
3