Speedlink Cyclon 2 Mode D'emploi page 10

 Only connect the webcam to the USB
port once the driver installation has
completed.
GB
 Windows will now ask you if it should
search for a Windows Update on the
Internet. Select No, not this time and
then click on Next.
 Select Install the software automatically
and click on Next.
 If Windows asks if the installation should
continue despite not passing Windows
Logo testing click on Continue Anyway.
 Click on "Finish" once the files have
been installed. Your Cyclon Webcam is
now ready for use.
Installation under Windows ME
 Insert the supplied driver CD into the
CD-ROM drive of your computer. The
Speed-Link driver installation menu
will load automatically (if this doesn't
happen, open Windows Explorer,
navigate to your CD-ROM drive and then
double click on the file "Setup.exe").
 Click on the button named "Driver /
Treiber". The InstallShield Wizard will
now guide you through the software
installation process. Follow the on-
screen instructions.
 Connect the webcam to any free USB
port on your PC.
 The hardware assistant will detect that a
All manuals and user guides at all-guides.com
new device has been connected. Follow
the on-screen instructions.
 Windows may ask you to insert the
original Windows installation CD. Keep
the Windows CD close at hand in case
asked to do so.
Using the Microphone
In order to use the integrated microphone,
you are required to set this microphone as
standard recording device in the Windows
Control Panel under Sounds and Audio De-
vices.
The messenger programs normally use the
standard Windows settings, though you
may be required to manually set the micro-
phone in your messenger.
Recording a Video
 Open the capture program from the
Start Menu by navigating to Start >
All Programs > Cyclon Webcam >
VideoView.
 If you are unable to see the live camera
picture in the program window you can
turn this feature on under Options >
Preview.
Before recording video you first have to cre-
ate a file where the video can be stored:
 Click on File > Set Capture File...,
select the directory where you would
like to save your video and then enter a
10