Velleman EDA5001 Notice D'emploi page 6

last number redial
Last number redial requires a mobile phone that supports this
function.
• Verify that the status indicator [A3] flashes blue (interval 5s).
• Press the function key [A2] 2x shortly. The display shows
REDIAL and the last number is redialled.
answer/reject/end a phone call
• Verify that the status indicator [A3] flashes blue (interval 5s).
• When an incoming call is detected, the LCD displays the caller ID
and rings.
• Press the function key [A2] once to answer the call; press it 2x
times fast to reject the call. In this case, the display shows
REJECT.
• The ear device can be left in the base station, or can be used
detached with the ear plug [5] inserted in the ear.
• Press the function key [A2] again to end the phone call. The
display shows HANGUP.
waiting calls
The availability of this function depends on the used network
operator.
• When a second incoming call is detected, the LCD displays the
caller ID and rings.
• Press and hold the function key [A2] for ±3s to answer the
second call. The display shows ACCEPT.
• To switch between the calls, press and hold the function key
[A2] for ±3s.
• To end an incoming call, press the function key [A2] shortly; the
current call is ended and the other line becomes active. The
display shows RESTORE.
switching between mobile phone and car kit
• During conversation, press and hold the function key [A2] for
±3s. The car kit is disabled and the phone call is transferred to
the mobile phone. The display shows TRANSFER.
• Press the function key [A2] shortly to transfer the call back to
the car kit. The display shows CONNECTED.
00 (07/04/2009)
BTSP2
6
®
Velleman